IEC 60059-1938 IEC标准电流额定值
作者:标准资料网 时间:2024-05-21 05:40:16 浏览:8775
来源:标准资料网
【英文标准名称】:IECstandardcurrentratings
【原文标准名称】:IEC标准电流额定值
【标准号】:IEC60059-1938
【标准状态】:作废
【国别】:国际
【发布日期】:1938
【实施或试行日期】:
【发布单位】:国际电工委员会(IEC)
【起草单位】:IEC/TC8
【标准类型】:()
【标准水平】:()
【中文主题词】:额定电流;电气工程;电流
【英文主题词】:electriccurrent;electricalengineering;ratedcurrent
【摘要】:
【中国标准分类号】:K04
【国际标准分类号】:17_220_01
【页数】:3P;A4
【正文语种】:英语
基本信息
标准名称: | 硫酸沸腾炉砌筑技术条件(附条文说明) |
英文名称: | Technical specification of lining laying for fluidized bed furnace of sulphuric acid |
中标分类: |
化工 >>
化工机械与设备 >>
化工设备 |
ICS分类: |
化工技术 >>
化工设备
|
替代情况: | 被HG/T 20661-2011代替 |
发布部门: | 国家石油和化学工业局 |
发布日期: | 1999-12-10 |
实施日期: | 2001-08-01 |
首发日期: | 1900-01-01 |
作废日期: | 2011-06-01 |
出版日期: | 1900-01-01 |
页数: | 24页 |
适用范围
本技术条件适用于硫铁矿焙烧制取二氧化硫原料气的硫酸沸腾炉的砌筑施工与验收。对于以硫磺为原料的焚硫炉的砌筑施工也可参照使用。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 化工 化工机械与设备 化工设备 化工技术 化工设备
Product Code:SAE J2044
Title:Quick Connect Coupling Specification for Liquid Fuel and Vapor/Emissions Systems
Issuing Committee:Fuel Systems Standards Committee
Scope:This SAE Recommended Practice defines standard tube end form dimensions so as to guarantee interchangeability between all connector designs of the same size and the standard end form. This document also defines the minimum functional requirements for quick connect couplings between flexible tubing or hose and rigid tubing or tubular fittings used in supply, return, and vapor/emissions in fuel systems. This document applies to automotive and light truck applications under the following conditions:a. Gasoline and diesel fuel delivery systems or their vapor venting or evaporative emission control systems.b. Operating pressure up to 500 kPa, 5 bar, (72 psig).c. Operating vacuum down to -50 kPa, -0.5 bar (-7.2 psi).d. Operating temperatures from -40 °C (D40 °F) to 115 °C (239 °F).Quick connect couplings function by joining the connector to a mating tube end form then pulling back to assure a complete connection. The requirements stated in this document apply to new connectors in assembly operations unless otherwise indicated. For service operations, the mating tube should be lubricated with SAE 30-weight oil before re-connecting.NOTE--New connector designs using the same materials as previously tested connectors may use the original results as surrogate data for 7.1, 7.2, 7.3, and 7.4.Vehicle OEM fuel system specifications may impose additional requirements beyond the scope of this general SAE document. In those cases, the OEM specification takes precedence over this document.